- PRODUCTS
- MODEL LIST
- APPLICATIONS
- SUPPORT
- SALES/SERVICE
- BLOG
- ABOUT
Login
SBE 26plus Seagauge Wave & Tide Recorder - DISCONTINUED
- Overview
- Downloads
- Videos
- Accessories
The SBE 26plus combines a stable time base, precision thermometer, and pressure sensor (Quartz or strain-gauge) to provide wave and tide recording of unprecedented resolution and accuracy, along with high-quality temperature information. The 26plus stores data in memory, and also outputs real-time tide data, wave data, and wave statistics. The large memory and low power requirements permit frequent water level recording and highly detailed wave characterization.
The 26plus integrates pressure samples to obtain water level measurements unaffected by wave action, and also independently burst-samples pressure at up to 4 Hz for wave amplitude calculation. The tide interval is programmable (1 minute to 12 hours). A 26plus with Quartz pressure can continuously measure pressure, or can conserve battery power by removing power from the pressure sensor between tide measurements (programmable integration from 10 sec to the entire tide interval). Temperature data is recorded with each tide. Waves are characterized by burst sampling, with programmable burst interval, number of samples/burst, and integration time. Logging start and stop times are programmable, allowing lab setup before deployment. An input connector for an optional SBE 4M conductivity sensor is standard.
The 26plus integrates pressure samples to obtain water level measurements unaffected by wave action, and also independently burst-samples pressure at up to 4 Hz for wave amplitude calculation. The tide interval is programmable (1 minute to 12 hours). A 26plus with Quartz pressure can continuously measure pressure, or can conserve battery power by removing power from the pressure sensor between tide measurements (programmable integration from 10 sec to the entire tide interval). Temperature data is recorded with each tide. Waves are characterized by burst sampling, with programmable burst interval, number of samples/burst, and integration time. Logging start and stop times are programmable, allowing lab setup before deployment. An input connector for an optional SBE 4M conductivity sensor is standard.