Service
Sales
Ask Us
WET Labs
Satlantic

WET Labs Instruments

To help you find the products that were formally on the WET Labs website, we have listed them here. Alternatively you can always find them through search or the Model Number List.

Based on the highly successful ac-9, the ac-spectra (ac-s) offers almost an order of magnitude increase in spectral resolution of in-situ absorption and beam attenuation. The 4 nm resolution allows for spectral "fingerprinting" and deconvolution analysis.
The Thetis Profiler is a submersible, vertically profiling platform for use in coastal marine and fresh water environments.
The HydroCycle-PO4 is a single analyte wet chemistry sensor engineered for environmental monitoring.
The ECO Triplet custom optical instrument is now available with active anti-biofouling. It features an evolutionary design that builds off the bio-wiper and faceplate available on the current ECO line.
The Triplet is a a special-order, three-optical-sensor instrument available in a user-defined configuration. The Triplet addresses the need for multiple simultaneous scattering and fluorescence sensors for autonomous and unattended measurement platforms.
The Sea-Bird Scientific SeaOWL UV-A™ SLC introduces a new in-situ oil-in-water sensor specifically designed for integration into the Teledyne Webb Research Slocom glider.
Based upon the highly successful WET Labs’ ECO sensor, Sea-Bird Scientific has developed an industry leading detection technology creating a 5X optical resolution improvement over its predecessor.
ECO FL fluorometers measure fluorescence from chlorophyll-a, CDOM, uranine, rhodamine, and phycoyanin and phycoerythrin.
The Water Quality Monitor (WQM) is designed to deliver core biogeochemical water quality parameters in coastal ecosystems from a single integrated package.
The ECO BB9 is a sensor system for measuring optical backscattering at nine wavelengths.
The ECO BB measures scattering at 124 degrees, the angle determined as a minimum convergence point for variations in the volume scattering function (VSF) induced by suspended materials and water itself. As a result, the signal measured by this meter is less determined by the type and size of the materials in the water and is more directly correlated to the concentration of the materials.
The Environmental Characterization Optics (ECO) series of sensors incorporates a common set of options with a single basic design to make them ideal for a wide variety of deployments.
The puck is a miniature version of the popular Environmental Characterization Optics (ECO) series sensors built for OEM applications.
The Environmental Characterization Optics (ECO) series of sensors incorporates a common set of options with a single basic design to make them ideal for a wide variety of deployments.
The Environmental Characterization Optics (ECO) series of sensors incorporate a common set of options with a single basic design to make them ideal for a wide variety of deployments.
FLBBCD is designed for float applications offering a 2000 meter depth rating.
The C-Star incorporates a novel monolithic housing with a highly integrated opto-electronic design to provide a low cost, compact solution for underwater measurements of beam transmittance.
DH4 is a sensor interface module for the collection, storage, and merging of digital and analog data from up to eight sensors.
The DH4-6000 is a sensor interface module that provides for the collection, storage, and merging of analog and digital data from up to eight sensors in both profile and moored modes. It can be deployed to depths of 6000 m.
Based on the highly successful AC9 and ACS, ACS-5000 offers almost an order of magnitude increase in spectral resolution of in-situ absorption and beam attenuation. The 4 nm resolution allows for spectral "fingerprinting" and deconvolution analysis.
WET Labs' Aquatic Laser Fluorescence Analyzer (ALFA) provides spectrally and temporally resolved measurements of key bio-environmental variables in oceanic, coastal, and fresh waters.
The c-Rover 2000 is an optical transmissometer designed for long-term deployment aboard profiling floats.
The WETStar fluorometer provides breakthrough performance for detecting various types of fluorescence. It uses a central axial optical tube to provide efficient signal output.
The beam attenuation meter is specifically designed for Autonomous Underwater Vehicles to accommodate size and drag considerations.
WET Labs' UBAT is designed to measure mechanically stimulated bioluminescence in both coastal and oceanic systems from 0–600 m in depth.
Subscribe to WET Labs Instruments