Note: We do not publish prices on the website. Please contact us [firstname.lastname@example.org or (+1) 425-643-9866] for pricing.
|37IMP-IDO||MicroCAT C & T (pressure optional) Recorder with Integrated Dissolved Oxygen sensor (IDO), Inductive Modem, & internal Pump - Includes 7000 m titanium housing, mooring clamp for jacketed wire, 8 MB Flash memory, lithium battery (non-hazardous), AF24173 Anti-Foulant Devices, Seasoft software, & complete documentation. Specify: mooring clamp wire size selection to match O.D. of wire jacket.||There are numerous
SBE 37 MicroCAT models
IMP, IMP-IDO, & IMP-ODO -- click here
for comparison of features).
37-IMP-IDO MicroCAT includes:
For photos of standard shipment, click here.
Communicating with 1 or more 37-IMP-IDOs requires use of Sea-Bird Inductive Modem Module (IMM) or Surface Inductive Modem (SIM), which provide serial interface between userís computer & up to 100 IM instruments coupled to single cable. Purchase IMM/SIM & optional Inductive Cable Coupler (ICC) separately.
|SBE 37-IMP-IDO Mooring Clamp Wire Size Selections (Specify clamp to match O.D. of mooring wire jacket) -- MUST SELECT ONE|
|37IMP-1a||Wire guide & mounting clamp for 1/4 in. diameter mooring wire||
Cable fits loosely through IM coupling core / wire guide, & is clamped
only at mounting clamp. See document
Thread for clamping to mooring cable:
|37IMP-1b||Wire guide & mounting clamp for 5/16 in. diameter mooring wire|
|37IMP-1c||Wire guide & mounting clamp for 3/8 in. diameter mooring wire|
|37IMP-1d||Wire guide & mounting clamp for 1/2 in. diameter mooring wire|
|37IMP-1e||Wire guide & mounting clamp for 6 mm diameter mooring wire|
|37IMP-1f||Wire guide & mounting clamp for 8 mm diameter mooring wire|
|37IMP-1g||Wire guide & mounting clamp for 10 mm diameter mooring wire|
|37IMP-1h||Wire guide & mounting clamp for 12 mm diameter mooring wire|
|37IMP-1i||Wire guide & mounting clamp for 16 mm (5/8 in.) diameter mooring wire|
|SBE 37-IMP-IDO ShallowCAT Option -- Plastic (PET-P) Housing with 250 meter depth rating|
|37IMP-2||250 m plastic housing instead of standard titanium housing (CREDIT)||
|SBE 37-IMP-IDO Pressure Sensor Range (Depth) Options|
|37IMP-3a||20 m strain gauge pressure sensor||
sensor is installed in end cap, & is not field replaceable / swappable. While highest
pressure rating gives you most flexibility in using 37-IMP-IDO, it is at expense of
accuracy & resolution. It is advantageous to use lowest range
pressure sensor compatible with your intended maximum operating
depth, because accuracy & resolution are proportional to pressure
sensor's full scale range. For example, comparing 2000 & 7000 m sensors --
|37IMP-3b||100 m strain gauge pressure sensor|
|37IMP-3c||350 m strain gauge pressure sensor|
|37IMP-3h||600 m strain gauge pressure sensor|
|37IMP-3d||1000 m strain gauge pressure sensor|
|37IMP-3e||2000 m strain gauge pressure sensor|
|37IMP-3f||3500 m strain gauge pressure sensor|
|37IMP-3g||7000 m strain gauge pressure sensor|
|SBE 37-IMP-IDO Storm Shipping Case Option -- holds up to 3 SBE 37-IMP-IDOs|
|37IMP-4I||Storm shipping case (iM2950) instead of standard wood crate -- holds up to 3 SBE 37-IMP-IDOs||
Price for 37IMP-4I reflects a credit for deletion of our standard wood crate.
|SBE 37-IMP-IDO Spares & Accessories|
|801542||AF24173 Anti-foulant Device (pair, bagged, labeled for shipping)||
devices fit into anti-foulant device cups at
conductivity cell intake and plumbing exhaust, under the
conductivity cell guard. Anti-foulant devices included with standard
shipment; these are spares.
Useful life varies, depending on several factors. We recommend that customers consider more frequent replacement when high biological activity & strong current flow (greater dilution of anti-foulant concentration) are present. Moored instruments in high growth & strong dilution environments have been known to obtain a few months of quality data, while drifters that operate in non-photic, less turbid deep ocean environments may achieve years of quality data. Experience may be strongest determining factor in specific deployment environments.
|50441||SBE 37 & 44 lithium batteries (spare), package of twelve 3.6V AA cells (Saft LS 14500)||
One set of batteries is included with
standard shipment; 50441 are spares. Batteries are easily accessed by
removing 2 screws from modem end cap & pulling out end cap.
Shipping restrictions apply for lithium batteries; see SBE 37-IMP-IDO
801863 is battery holder,
without batteries. Battery holder is included with standard
shipment; this is a spare.
|801863||Yellow top battery holder (14V nominal, Version 2) for use with twelve 3.6V AA lithium cells, for pumped SBE 37 (SMP & IMP with firmware version > 4.0 & all SMP-ODO, IMP-ODO, SMP-IDO, & IMP-IDO)|
|801836||37-IM/IMP/IMP-IDO/IMP-ODO Internal Data I/O cable, 0.3 m (DN 33406)||For uploading data quickly using internal RS-232 connector.|
|TBD||Storm shipping case (iM2950) -- holds up to 3 SBE 37-IMP-IDOs||
|For Surface Inductive Modem (SIM), Inductive Modem Module (IMM), and Inductive Cable Coupler (ICC), see separate listing.|
Product configuration options listing for all products
Additional cables, mount kits, and spares may be found at: Cables, Mount kits for Sea-Bird sensors, Mount kits for Third Party sensors, Spare parts
Last modified: 14 Feb 2013
Sea-Bird Home Phone: (+1) 425-643-9866 Fax: (+1) 425-643-9954 E-mail: email@example.com