02D |
AN02D: Instructions for Care and Cleaning of Conductivity Cells |
Care of Instrument / Maintenance |
June 13, 2016 |
Conductivity |
06 |
AN06: Determination of Sound Velocity from CTD Data |
Technical Background Information |
February 2, 2010 |
CTD |
07 |
AN07: Calculating Calibration Coefficients for Sea Tech and Chelsea (Alphatracka) Transmissometers |
Calibration |
May 7, 2011 |
Optics |
08 |
AN08: Sea-Bird Universal Opto-isolated Junction Box |
Instrument Configuration and Use |
March 7, 2008 |
N/A |
09 |
AN09: Calculating Calibration Coefficients for Sea Tech Fluorometer & WET Labs Flash Lamp Fluorometer (FLF) |
Calibration |
September 1, 2008 |
Optics |
10 |
AN10: Compressibility Compensation of Sea-Bird Conductivity Sensors |
Technical Background Information |
May 7, 2013 |
Conductivity |
11Chelsea |
AN11Chelsea: Calculating Calibration Coefficients for Chelsea PAR Light Sensor with Built-In Log Amplifier |
Calibration |
July 26, 2017 |
Optics |
11General |
AN11General: PAR Light Sensors |
Calibration |
July 26, 2017 |
Optics |
11LICOR |
AN11Licor: Calculating Calibration Coefficients for Licor Underwater Type SA PAR Light Sensor without Built-In Log Amplifier |
Calibration |
July 26, 2017 |
Optics |
11QSP-L |
AN11QSP-L: Calculating Calibration Coefficients for Biospherical PAR Sensor with Built-In Log Amplifier |
Calibration |
July 26, 2017 |
Optics |
11QSP-PD |
AN11QSP-PD: Calculating Calibration Coefficients for Biospherical PAR Sensor without Built-In Log Amplifier |
Calibration |
July 26, 2017 |
Optics |
11S |
AN11S: Using Biospherical Surface PAR Light Sensor with SBE 11plus Deck Unit |
Instrument Configuration and Use |
July 26, 2017 |
Optics |
12-1 |
AN12-1: Pressure Port Oil Refill Procedure and Nylon Capillary Fitting Replacement |
Care of Instrument / Maintenance |
September 12, 2008 |
Pressure |
14 |
AN14: 1978 Practical Salinity Scale |
Technical Background Information |
January 12, 1989 |
CTD |
15 |
AN15: TC Duct Assembly & Plumbing Installation |
Instrument Configuration and Use |
October 12, 2012 |
CTD |
16 |
AN16: Entering Calibration Coefficients for D&A Instruments (Campbell Scientific) OBS-3 Optical Backscatter Sensor |
Calibration |
September 18, 2014 |
Optics |
17 |
AN17: Instructions for Use of the SBE 14 Remote Depth Readout |
Instrument Configuration and Use |
October 1, 2012 |
N/A |
18-1 |
AN18-1: SBE 18, 27, and 30, & AMT pH Sensor Calibration (PHFIT Version 2.1) |
Calibration |
September 18, 2014 |
pH |
18-2 |
AN18-2: SBE 18, 22, 27, and 30 pH Sensor Storage, Maintenance, and Calibration |
Calibration |
June 13, 2016 |
pH |
18-3 |
AN18-3: SBE 18 pH Sensor Hookup Instructions |
Instrument Configuration and Use |
July 12, 2001 |
pH |
19 |
AN19: SBE 27 or 30 Oxygen Reduction Potential ORP Sensor |
Calibration |
February 13, 2010 |
ORP |
20 |
AN20: Re-calibration of Paroscientific Digiquartz Pressure Sensors |
Calibration |
June 13, 1989 |
Pressure |
21 |
AN21: Instructions for Use of Nickel-Cadmium Battery Packs |
Instrument Configuration and Use |
February 13, 2010 |
CTD |
22 |
AN22: Pump Speed Adjustment Instructions |
Instrument Configuration and Use |
March 13, 1991 |
Pump |
27 |
AN27: Strain Gauge Pressure Sensor Error Sources - older instruments with Paine pressure sensors |
Technical Background Information |
February 13, 2010 |
Pressure |
27Druck |
AN27D: Minimizing Strain Gauge Pressure Sensor Errors |
Technical Background Information |
May 18, 2016 |
Pressure |
30 |
AN30: Fresh Water Conductivity Measurements using the SBE 19 (not 19plus) SeaCAT Profiler |
Instrument Configuration and Use |
March 25, 2001 |
CTD |
31 |
AN31: Computing Temperature and Conductivity Slope and Offset Correction Coefficients from Laboratory Calibrations and Salinity Bottle Samples |
Calibration |
June 13, 2016 |
CTD |
33 |
AN33: Using the DC Opto Isolated Junction Box [PN 91118] |
Instrument Configuration and Use |
March 3, 2001 |
N/A |
34 |
AN34: Instructions for Use of Conductivity Cell Filling and Storage Device PN 50087 and 50087.1 |
Care of Instrument / Maintenance |
October 13, 2012 |
Conductivity |
35 |
AN35: Use of SBE 911plus with General Oceanics 1015 Rosette® |
Instrument Configuration and Use |
February 13, 1992 |
Water Sampler |
36A |
AN36A: Installation of P/N 50094 Conductivity Cell Tubing Connector Kit |
Care of Instrument / Maintenance |
April 13, 1998 |
Conductivity |
38 |
AN38: TC Duct Fundamentals |
Technical Background Information |
July 10, 2012 |
CTD |
39 |
AN39: Calculating Calibration Coefficients for the Chelsea Aquatracka Fluorometer |
Calibration |
February 24, 2010 |
Optics |
40 |
AN40: SBE 5T and 5P Pump Speed Adjustment Instructions |
Instrument Configuration and Use |
June 22, 2016 |
Pump |
41 |
AN41: Calculating Calibration Coefficients for WETStar Fluorometer |
Calibration |
May 13, 2011 |
Optics |
42 |
AN42: ITS-90 Temperature Scale |
Technical Background Information |
May 18, 2016 |
Temperature |
43 |
AN43: Universal Ni-Cad Battery Charger Operating Instructions |
Instrument Configuration and Use |
January 13, 1995 |
CTD |
45 |
AN45: Guide to SBE 32 Carousel Water Sampler Configuration Selections |
Instrument Configuration and Use |
September 16, 2014 |
Water Sampler |
46 |
AN46: DC Opto-Isolated RS-485 to RS-232 Junction Box P/N 90238 Instructions for Application and Use |
Instrument Configuration and Use |
March 13, 2001 |
N/A |
47 |
AN47: Using Biospherical Surface PAR Light Sensor with SBE 33 or SBE 36 Deck Unit |
Instrument Configuration and Use |
July 26, 2017 |
Optics |
48 |
AN48: Entering Calibration Coefficients for the Seapoint Turbidity Meter |
Calibration |
December 9, 2013 |
Optics |
51 |
AN51: Using a TC Duct on Pumped SBE 19 (NOT 19plus) SeaCATs |
Instrument Configuration and Use |
March 17, 2001 |
CTD |
52 |
AN52: AC Powered Opto-Isolated RS-485 to RS-232 Junction Box P/N 80491 Instructions for Application and Use |
Instrument Configuration and Use |
February 9, 2010 |
N/A |
53 |
AN53: Instructions and use of Bay Model Sensors |
Instrument Configuration and Use |
January 13, 1999 |
N/A |
54 |
AN54: Entering Calibration Coefficients for the Seapoint Fluorometer |
Calibration |
February 13, 2010 |
Optics |
56 |
AN56: Interfacing to RS-485 Sensors |
Instrument Configuration and Use |
February 11, 2009 |
N/A |
57 |
AN57: Connector Care and Cable Installation |
Care of Instrument / Maintenance |
May 13, 2014 |
N/A |
59 |
AN59: A Load-Bearing Underwater Cable for Hand-Hauled, Real-Time Profiling |
Instrument Configuration and Use |
October 11, 2012 |
N/A |
60 |
AN60: Year 2000 Compatibility for Sea-Bird Instruments and Software |
Technical Background Information |
September 16, 2014 |
N/A |
61 |
AN61: Calculating Calibration Coefficients for the Chelsea Minitracka Fluorometer |
Calibration |
February 2, 2010 |
Optics |
62 |
AN62: Calculating Calibration Coefficients for ECO-FL Fluorometer, ECO-NTU Turbidity Meter, and ECO-FL-NTU Fluorometer/Turbidity Meter |
Calibration |
May 14, 2011 |
Optics |
63 |
AN63: Calculating Calibration Coefficients for the Turner SCUFA (I, II, or III) Fluorometer/OBS |
Calibration |
February 2, 2010 |
Optics |
64 |
AN64: SBE 43 Dissolved Oxygen Sensor - Background Information, Deployment Recommendations, and Cleaning and Storage |
Care of Instrument / Maintenance |
June 16, 2013 |
Dissolved Oxygen |
64-1 |
AN64-1: Plumbing Installation - SBE 43 DO Sensor and Pump on a CTD |
Instrument Configuration and Use |
April 16, 2008 |
Dissolved Oxygen |
64-2 |
AN64-2: SBE 43 Dissolved Oxygen Sensor Calibration and Data Corrections |
Calibration |
June 19, 2012 |
Dissolved Oxygen |
64-3 |
AN64-3: SBE 43 Dissolved Oxygen (DO) Sensor - Hysteresis Corrections |
Instrument Configuration and Use |
August 1, 2014 |
Dissolved Oxygen |
66 |
AN66: Routine Maintenance for the SBE 32 Carousel Water Sampler |
Care of Instrument / Maintenance |
April 16, 2013 |
Water Sampler |
67 |
AN67: Editing Sea-Bird .hex Data Files |
Technical Background Information |
October 15, 2001 |
N/A |
68 |
AN68: Using USB Ports to Communicate with Sea-Bird Instruments |
Technical Background Information |
October 19, 2012 |
N/A |
69 |
AN69: Conversion of Pressure to Depth |
Technical Background Information |
July 1, 2002 |
Pressure |
70 |
AN70: Installing Anti-Foulant Device Mount Kit on SBE 4, 16, 19, and 21 Conductivity Cells |
Care of Instrument / Maintenance |
May 19, 2008 |
Conductivity |
71 |
AN71: Desiccant Use and Regeneration (drying) |
Care of Instrument / Maintenance |
May 18, 2016 |
N/A |
72 |
AN72: Setting Up WET Labs ECO Sensor with Bio-Wiper™ for integration with SeaCATplus CTDs (SBE 16plus, 16plus-IM, 19plus) |
Instrument Configuration and Use |
May 15, 2013 |
Optics |
72-V2 |
AN72-V2: Setting Up WET Labs ECO Sensor with Bio-Wiper™ for integration with SeaCATplus V2 CTDs (SBE 16plus V2, 16plus-IM V2, 19plus V2) |
Instrument Configuration and Use |
April 15, 2014 |
Optics |
73 |
AN73: Using Instruments with Pressure Sensors at Elevations Above Sea Level |
Instrument Configuration and Use |
April 12, 2017 |
Pressure |
74 |
AN74: Calculating Calibration Coefficients for Turner Cyclops-7 Fluorometer or Turbidity Sensor |
Calibration |
August 8, 2010 |
Optics |
75 |
AN75: Maintenance of SBE 5T, 5P, and 5M Pumps |
Care of Instrument / Maintenance |
June 22, 2016 |
Pump |
76 |
AN76: pH or pH/ORP Sensors and Moored Applications |
Instrument Configuration and Use |
March 5, 2008 |
pH |
77 |
AN77: Entering Calibration Coefficients for the Seapoint Ultraviolet Fluorometer |
Calibration |
August 8, 2010 |
Optics |
78 |
AN78: Inductive Modem Module (IMM) Quick Start Instructions |
Instrument Configuration and Use |
September 25, 2005 |
Inductive Modem |
79 |
AN79: Configuring Inductive Modem Module (IMM) for Logic Level Serial (LLS) |
Instrument Configuration and Use |
September 9, 2005 |
Inductive Modem |
80 |
AN80: Inductive Modem (IM) Communication between Two Inductive Modem Modules (IMMs) |
Instrument Configuration and Use |
September 14, 2005 |
Inductive Modem |
81 |
AN81: Entering Calibration Coefficients for Campbell Scientific/D&A OBS-3+ Optical Backscatter Sensor |
Calibration |
October 15, 2010 |
Optics |
82 |
AN82: Guide to Specifying a CTD - Understanding Impacts on Accuracy |
Technical Background Information |
April 6, 2016 |
CTD |
83 |
AN83: Deployment of Moored Instruments |
Technical Background Information |
April 12, 2017 |
CTD |
84 |
AN84: Using Instruments with Druck Pressure Sensors in Muddy or Biologically Productive Environments |
Instrument Configuration and Use |
January 14, 2014 |
Pressure |
85 |
AN85: Handling of Ferrite Core on Instruments with Inductive Modem Telemetry |
Care of Instrument / Maintenance |
May 19, 2016 |
N/A |
86 |
AN86: Change to SBE 9plus CTD Bottom Contact Switch Connector (JB6) |
Instrument Configuration and Use |
February 14, 2007 |
CTD |
87 |
AN87: Calculating Calibration Coefficients for ECO-BB Scattering/Turbidity Meter (voltage or RS-232 output sensor) |
Calibration |
May 11, 2011 |
Optics |
88 |
AN88: Frame Coating Repair for the SBE 32 Carousel Water Sampler |
Care of Instrument / Maintenance |
October 31, 2012 |
Water Sampler |
89 |
AN89: Retrofit Battery Pack for SBE 37 MicroCAT and SBE 44 Underwater Inductive Modem |
Care of Instrument / Maintenance |
September 16, 2014 |
CTD |
90 |
AN90: Absolute Salinity and TEOS-10: Sea-Bird's Implementation |
Technical Background Information |
September 3, 2013 |
CTD |
91 |
AN91: Calculating Calibration Coefficients for C-Star Transmissometer (voltage or RS-232 output sensor) |
Calibration |
May 12, 2011 |
Optics |
92 |
AN92: Real-Time Oceanography with Inductive Moorings and the Inductive Modem Module (IMM) |
Technical Background Information |
October 24, 2016 |
N/A |
93 |
AN93: CTD Basics |
Technical Background Information |
September 19, 2016 |
CTD |
94 |
AN94: Wide-Range Conductivity Calibration |
Calibration |
June 4, 2013 |
Conductivity |
95 |
AN95: Setting Up Altimeter with Sea-Bird Profiling CTD |
Instrument Configuration and Use |
November 14, 2016 |
Altimeter |
96 |
AN96: Using Sea-Bird Scientific (Satlantic) PAR Light Sensors |
Instrument Configuration and Use |
July 26, 2017 |
Optics |
97 |
AN97: Best Practices for Shipping and Deploying Profiling Floats with SBE 41/41CP CTD |
Care of Instrument / Maintenance |
March 13, 2017 |
Conductivity |
98 |
AN98: Considerations for CTD Spatial and Temporal Resolution on Moving Platforms |
Technical Background Information |
July 5, 2017 |
CTD |
99 |
Calculating pH from ISFET pH Sensors |
|
May 21, 2019 |
pH |
AN101 |
AN101: Change to ALFA sampling bottle caps |
|
June 29, 2017 |
Optics |
AN104 |
AN104 Disable BLIS operation on WQM |
Technical Background Information |
June 29, 2017 |
Water Sampler |
AN105 |
AN105 Laboratory Experiments on Crude Oil Detection using ECO Fluorometers |
Technical Background Information |
June 29, 2017 |
Optics |
AN106 |
AN106 Functional check and cleaning of transmissometer windows |
Care of Instrument / Maintenance |
July 4, 2017 |
Optics |
AN107 |
AN107 HydroCycle-PO4 and Cycle-PO4 Service Offerings |
Care of Instrument / Maintenance |
July 4, 2017 |
Nutrient |
AN109 |
AN109 Notice of Clarification of ECO bb angle nomenclature |
Technical Background Information |
July 4, 2017 |
Optics |
AN110 |
AN110 Repairing anodized surfaces |
Care of Instrument / Maintenance |
July 4, 2017 |
Optics |
AN111 |
AN111 Change to Pin Out from Cycle-PO4 to HydroCycle-PO4 |
Care of Instrument / Maintenance |
July 4, 2017 |
Optical |
AN112 |
AN112 HydroCycle-PO4 and Cycle PO4 Reagent/Filter Compatibility |
Instrument Configuration and Use |
July 4, 2017 |
Optical |
AN113 |
AN113 Thetis Anchor Rigging and Deployment Instructions |
Instrument Configuration and Use |
July 4, 2017 |
AUV |
AN114 |
AN114 ECO Centroid Angles for Back Scatter Measurements |
Technical Background Information |
July 4, 2017 |
Optical |
AN115 |
AN115 WQM Testing and Troubleshooting Commands |
Instrument Configuration and Use |
July 4, 2017 |
Turbidity |
AN116 |
AN116 Functional check and cleaning of transmissometer windows |
Care of Instrument / Maintenance |
June 29, 2017 |
Optics |
AN117 |
AN117 Standard Stocked Detector Wavelengths |
Technical Background Information |
June 23, 2017 |
Radiometer |
AN118 |
AN118 Nutrient Units Primer |
Technical Background Information |
June 23, 2017 |
Nutrient |
AN119 |
AN119 CDOM Interference on Nitrate Measurements |
Technical Background Information |
June 23, 2017 |
Nutrient |
AN120 |
AN120 Foreign Shipper’s Declaration of U.S. Goods Returned |
|
July 4, 2017 |
N/A |
AN121 |
AN121 Information about acceptance angles for beam attenuation meters |
Calibration |
July 5, 2017 |
AUV |
AN123 |
AN123 Thetis Overview |
Technical Background Information |
July 14, 2017 |
AUV |
AN124 (171108-1) |
AN124: Early Rinse Command and more Aggressive Sensor cleaning with Bleach |
Care of Instrument / Maintenance |
December 8, 2017 |
Nutrient |